Loading
myRockwellAutomation
채용 정보
투자자
PartnerNetwork 포털
문의하기
인기 자료
호환성 및 다운로드(제품 호환성 및 다운로드 센터) 기술 지원 센터 Literature Library(문서 자료실) 라이프사이클(수명 주기) 상태 Learning+ 교육 포털
 
제품 관리
자산 관리(RAAMP) Installed Base Evaluation(IBE) My Equipment Self-Service 제품 등록 수리 서비스 계약서 및 티켓 소프트웨어 정품 등록 소프트웨어 구독 지속 가능성 대시보드
 
제품 설정 및 선정
조언자 제품구성사양(BOM) CrossWorks Integrated Architecture Builder 제품 카탈로그 ProposalWorks 제안서 작성기 ProposalWorks Standards Builder Safety Automation Builder
 

 

모든 도구 보기 →

InformationInformation
This content is not available in your selected language.
Rockwell Automation 로고
제품
하드웨어
하드웨어의 새로운 사항
회로 및 부하 보호 상태 감시 모니터링 연결 장비 분산제어시스템 드라이브 에너지 모니터링 HMI(Human Machine Interface) 독립형 카트 기술 산업용 컴퓨터 및 모니터 산업 제어 제품 I/O 모듈 조명 제어
모션 컨트롤 모터 컨트롤 네트워크 보안 및 인프라 패키지 솔루션 전원 공급 장치 프로그래밍이 가능한 컨트롤러 푸쉬 버튼 및 신호감시 장비 릴레이 및 타이머 안전 장치 장착 시스템 안전 제품 센서 및 스위치 신호 인터페이스
소프트웨어
소프트웨어의 새로운 사항
클라우드 소프트웨어
 
설계
Studio 5000 FactoryTalk Logix Echo Emulate3D 디지털 트윈 Arena 시뮬레이션 FactoryTalk Design Studio FactoryTalk Twin Studio FactoryTalk Vault
 
분석 및 데이터
FactoryTalk Historian FactoryTalk 분석 FactoryTalk Analytics LogixAI FactoryTalk DataMosaix FactoryTalk® Energy Manager Thingworx 산업용 사물인터넷 FactoryTalk Transaction Manager FactoryTalk Edge Manager 모델 예측 제어(MPC)
HMI
FactoryTalk View FactoryTalk Optix
 
MES
Plex MES Plex 품질 관리 FactoryTalk PharmaSuite Finite Scheduler
 
고성능 모니터링
Plex 생산 모니터링 FactoryTalk Metrics OEE
 
씬 클라이언트 관리
ThinManager
유지보수
Plex APM Fiix CMMS FactoryTalk AssetCentre FactoryTalk Remote Access FactoryTalk Network Manager Emonitor
 
프로세스
PlantPAx FactoryTalk Batch
 
Industrial Communications
FactoryTalk Linx
 
XR/증강 현실
Vuforia
제품 디렉터리 Allen‑Bradley FactoryTalk
서비스
자산 최적화 및 인력 서비스
자산 최적화 서비스 개요 장비 수리 장비 재 제조 수리 및 재고 계약 통합 서비스 계약 온라인 지원 및 모니터링 온사이트 및 현장 서비스 안전 서비스 교육 서비스
사이버보안 및 네트워크 인프라
사이버보안 산업용 네트워크 인프라 사전 엔지니어링 네트워크 솔루션
디지털 스레드
개요
생산 자동화
개요
LifecycleIQ 서비스
LifecycleIQ 서비스
LifecycleIQ 서비스
라이프사이클 서비스는 제조 시설이 모든 라이프사이클 단계에서 보다 빠르고 스마트하며 민첩하게 작업할 수 있도록 지원합니다.
시작하기
LifecycleIQ 서비스
솔루션 및 산업
솔루션
고급 모션 및 로봇 공학 자산 관리 사이버보안 데이터 운영 및 분석 디지털 스레드 디지털 트랜스포메이션 산업 자동화 및 제어 산업용 컴포넌트 네트워크 및 인프라 On-Machine 솔루션
패키지 솔루션 프로세스 솔루션 생산 자동화 제조 작업 관리자 안전 솔루션  확장 가능한 제어 및 비쥬얼라이제이션 스마트 제조 지속 가능한 솔루션 인력 강화
 
다음을 위한 솔루션
장비제조업체
산업
자동차 및 타이어 시멘트 화학 엔터테인먼트 섬유 및 직물 식음료(F&B) 가정용품 및 생활용품 수소 인프라 생명과학
해양 금속 채광 석유 및 가스 발전 인쇄 및 출판 펄프 및 제지 반도체 창고 및 주문 처리 상하수도 및 폐수 처리
Plex를 통해 획기적인 결과를 달성한 사이다 제조업체
Plex를 통해 획기적인 결과를 달성한 사이다 제조업체
성공 사례
Plex를 통해 획기적인 결과를 달성한 사이다 제조업체
Revolution Group은 Downeast Cider가 Plex MES를 채택하여 빠른 비즈니스 성장을 관리할 수 있도록 지원합니다.
지금 알아보기
성공 사례 보기
지원
문서
기술 문서 센터 제품 도면 및 배선도 제품 인증 릴리스 정보 기술 사양
제품 지원
다운로드 선정 및 구성 관리
교육
웨비나 인력 개발 교육 강사 주도형 교육 과정 인증 프로그램 직무 지원 교육 워크스테이션 Learning+ 교육 구독
문의하기
TechConnect 지원 고객 관리팀 Software Portal Help 일반적인 문의
TechConnect 지원
TechConnect 지원

기술 문제를 해결하기 위한 지식과 지원을 받으십시오.

TechConnect에 대해 자세히 알아보기
호환성 및 다운로드(제품 호환성 및 다운로드 센터) Knowledgebase(기술 지원 센터) Literature Library(문서 자료실) 온라인 커뮤니티 참여
영업 및 파트너
파트너 찾기
파트너 찾기로 이동
 
Rockwell Automation의 PartnerNetwork
PartnerNetwork 프로그램 디지털 파트너 대리점 라이선스 개발자
장비제조업체(OEM) 파트너 전략적 제휴 파트너 시스템 통합업체 파트너 기술 파트너
온라인 주문
소프트웨어 구독 온라인 교육 강사 주도형 교육 Learning+ 교육 구독
PartnerNetwork™란 무엇입니까?
PartnerNetwork™란 무엇입니까?

Rockwell Automation PartnerNetwork™ 프로그램을 통해 고객은 최고의 인력, 제품, 서비스 및 솔루션에 액세스하여 제조 목표를 달성하고 커넥티드 엔터프라이즈를 구현할 수 있습니다.

지금 둘러보기
myRockwellAutomation
채용 정보
투자자
PartnerNetwork 포털
문의하기
자료
인기 자료
호환성 및 다운로드(제품 호환성 및 다운로드 센터) 기술 지원 센터 Literature Library(문서 자료실) 라이프사이클(수명 주기) 상태 Learning+ 교육 포털
 
제품 관리
자산 관리(RAAMP) Installed Base Evaluation(IBE) My Equipment Self-Service 제품 등록 수리 서비스 계약서 및 티켓 소프트웨어 정품 등록 소프트웨어 구독 지속 가능성 대시보드
 
제품 설정 및 선정
조언자 제품구성사양(BOM) CrossWorks Integrated Architecture Builder 제품 카탈로그 ProposalWorks 제안서 작성기 ProposalWorks Standards Builder Safety Automation Builder
 

 

모든 도구 보기 →

Select country or region
  • 한국
  • Argentina
  • Australia
  • Belgique | Belgium
  • Brasil
  • Canada
  • Colombia
  • Czech Republic
  • Denmark
  • Deutschland
  • España
  • Finland
  • France
  • Hungary
  • India
  • Indonesia
  • Ireland
  • Israel
  • Italia
  • México
  • Netherlands
  • New Zealand
  • Norway
  • Poland
  • Portugal
  • Puerto Rico
  • Romania
  • Russia
  • Schweiz | Suisse
  • Singapore
  • South Africa
  • Sweden
  • Turkey
  • Ukraine
  • United Arab Emirates
  • United Kingdom
  • United States
  • Österreich
  • 中国
  • 台灣, 中國
  • 日本
Select language
  • 한국어
  • Deutsch
  • English
  • Español
  • Français
  • Italiano
  • Português
  • 日本語
  • 简体中文
  • 繁體中文
Sign In Create an Account
Why Create an Account?
Create bills of materials, submit repair quotes, register products and more!

Manage your e-communication subscription preferences.

Manage your user profile.
Welcome, {0}
Residing Location
My Account Sign Out
Your recent searches
  • HistoryHistory
    CloseClose
  • HistoryHistory
    CloseClose
  • HistoryHistory
    CloseClose
  • HistoryHistory
    CloseClose
  • HistoryHistory
    CloseClose
  • HistoryHistory
    CloseClose
All
Products
Documents
Downloads
Suggested search terms
  • SearchSearch
  • SearchSearch
  • SearchSearch
  • SearchSearch
  • SearchSearch
  • SearchSearch
Results for "{0}"
View all results
Product results for "{0}"
Product Image
Product Image
Product Image
View all product results
Document results for "{0}"
Portable Document Format.pdf file type
Publication Type: Published Date: Language:
Portable Document Format.pdf file type
Publication Type: Published Date: Language:
Portable Document Format.pdf file type
Publication Type: Published Date: Language:
View all document results
Download results for "{0}"
DownloadDownload
Catalog Numbers:
DownloadDownload
Catalog Numbers:
DownloadDownload
Catalog Numbers:
View all download results

Training Course Agenda

Arena Simulation logo
      • Overview
      • Call Center
      • Food & Beverage
      • Government & Military
      • Healthcare & Hospital
      • Logistics
      • Manufacturing
    • Overview
    • Call Center
    • Food & Beverage
    • Government & Military
    • Healthcare & Hospital
    • Logistics
    • Manufacturing
      • Mining
      • Oil & Gas
      • Packaging
      • Port & Terminal
      • Retail
      • Supply Chain
      • Case Studies
    • Mining
    • Oil & Gas
    • Packaging
    • Port & Terminal
    • Retail
    • Supply Chain
    • Case Studies
  • Arena Software in Academics
      • Overview
      • FAQs
      • System Requirements
      • Training Services
      • Consulting Services
    • Overview
    • FAQs
    • System Requirements
    • Training Services
    • Consulting Services
      • Overview
      • Find a Partner
      • Become a Partner
      • Software Download Options
    • Overview
    • Find a Partner
    • Become a Partner
    • Software Download Options
      • Case Studies
      • Blog
    • Case Studies
    • Blog
  • Academic
Download Free Trial

Students enrolling in the Arena Simulation Software Public Course should have a basic understanding of statistics and probability. Students receive a bound workbook containing course notes, example problems (providing step by step instruction) and workshop problems. Solutions to the example and workshop problems are provided during the course.

Day 1 - Introduction to Simulation

Your first day begins with an introduction to simulation and the Arena modeling methodology. Next you'll apply these fundamentals to a mini-project, so that by the end of the day, you will have achieved your first successful application of simulation. Using Arena's integrated tools and flowchart modeling environment, you'll build a graphically animated model, select appropriate distributions from empirical data, and perform a statistical analysis of model results.

Section 1: Introduction

A basic overview of course contents and a review of discrete event simulation is covered.

Section 2: Introductory Concepts and Modules

  • Basic simulation concepts of entities, resources, and queues
  • Commonly used Arena modeling constructs such as: Create, Seize, Delay, Release, WIP, Assign, Decide, and Dispose logic modules as well as Entity, Resource, and Variable spreadsheet modules
  • Scoreboard animation
  • Stations and Routes to define and represent animated movement. These modules and concepts are used in a loan process example and in a chapter ending workshop.
  • Introductory Concepts Workshop

Section 3: Resource Sets and Schedules

  • Explanation of Arena modeling constructs of Sets and Schedules, which are used for modeling systems requiring limitations on resource availability, cross-utilizing resources, and/or varying arrivals to a system
  • Additional animation capabilities including basic resource animation and the animation of the current simulation time and date
  • A Department of Motor Vehicles system example is used to further the aforementioned ideas
  • Resource Set Workshop

Day 2 - Introduction to Common Modeling Concepts

The fundamentals presented on Day 1 are extended into areas such as modeling complex decision logic, and using Arena's built-in material handling system constructs. Animation and analysis concepts are incorporated throughout the course to reinforce the importance of these aspects of the successful use of simulation. Introduction to the new visualization tools in Arena as well as application-focused consulting and project jump start. You will learn how to build live data dashboards and get an overview of 3D animation in Arena. 

Section 4: Making Decisions with Simulation

The Making Decisions with Simulation section further explains the outputs provided by Arena and how the outputs can be used to compare varying systems. This discussion provides an understanding of confidence intervals (half widths) and how to interpret Arena’s half width output. 

Terminating and non-terminating systems are explained, as well as run conditions necessary for each of these systems. 

Students use models they have built earlier in the course to learn how to perform analysis runs for terminating and non- terminating systems.

Section 5: Process Modeling

More advanced modeling concepts are detailed in the Process Modeling section. Concepts detailed include some of the commonly encountered aspects of systems studied via simulation, including: sets of similar elements (e.g., resources, counters), duplicating entities, grouping entities, assigning unique characteristics to entities, queue ranking, user defined statistics, overlapping resources, resource failures, arrayed variables and expressions, and unconstrained movement of entities through a system. 

Modules from the Basic Process, Advanced Process, and Advanced Transfer panels are used to model the aforementioned concepts. 

A toy manufacturing process is used in a series of progressive examples. Animating the unconstrained movement of entities is also introduced.

  • Process Modeling Workshop – Part 1
  • Process Modeling Workshop – Part 2

Day 3 - Material Handling, Entity Flow, External Data Sources 

The third day of the course continues to build upon concepts learned in the previous two days and introduces material handling constructs, controlling entity flow and reading and writing to/from external data sources.

Section 6: Advanced Modeling Concepts

  • Restricting entity movement, model hierarchy, reading and writing to/from external data sources
  • Station Sets and further work with model animation
  • A progressive example of a lab facility is developed

Section 7: Material Handling

  • Students learn how to model the movement of entities using material-handling devices (e.g., fork trucks, pallet movers, conveyors)
  • The differences between free-path and guided transporters is discussed and learned through a manufacturing example
  • Students also learn the difference between non-accumulating and accumulating conveyors and practice with an airport check-in example

Arena Supplemental Booklet

This booklet includes an introduction to running a simulation project covering topics such as:

  • Advantages and limitations of simulation
  • Project management
  • Components of a simulation project including the definition, formulation, verification / validation, analysis and recommendation phases
  • Contains an example functional specification, as well as relevant papers from the Winter Simulation Conference

Appendices

Appendices covering the following topics may be addressed during the course: Arena User Interface, Visual Designer, OptQuest for Arena, Expression Builder, Commonly Used Variables and Mathematical Expressions, Debugging Tools, Costing, and Statistical Distributions.

Use of Post-course Consulting Hours – 6 hours

In order to make the best use of the 6 hours of consultation, we advise the following:

  • The intent of these hours is to assist you with beginning your first simulation project or to advise you on the modeling approach and organization of yourproject.
  • Prior to meeting, prepare an outline of topics you would like to discuss with the consultant.

Post-course Consulting Hours may be used upon completion of the course with the following stipulations:

  • Consulting will be scheduled at a mutually agreed upon time with a consultant
  • Consulting hours will be used during regular business hours, Monday through Friday, 8am – 5pm
  • Consulting hours expire 90 days after completion of this training course.
  • Consulting takes place remotely via telephone and WebEx
  • No deliverables are guaranteed. (For example; a completed simulation project, Visual Basic forApplications coding, or completion of major sections of logic.)
  • Time is used in minimum 30 minuteincrements
  • Off-lin e preparation and/or research time counts toward the consulting hours. Your consultant will keep you informed of the time used and time remaining
  • These hours must be used by this training course attendee and are non-transferable

If you have difficulties with a specific model and it has to do with the operation of Arena Simulation Software, this may be covered by your support agreement. In this case, we advise you contact Arena Technica l Support. 

  1. Chevron LeftChevron Left Rockwell Automation 홈 Chevron RightChevron Right
  2. Chevron LeftChevron Left 제품 Chevron RightChevron Right
  3. Chevron LeftChevron Left 소프트... Chevron RightChevron Right
  4. Chevron LeftChevron Left Arena Simulation Software Services & Support Chevron RightChevron Right
  5. Chevron LeftChevron Left Training Chevron RightChevron Right
  6. Chevron LeftChevron Left Arena Training Course Agenda Chevron RightChevron Right
회사
회사 소개 접근성 채용 정보 다양성, 윤리, 통합 온라인 커뮤니티 참여 투자자 관계 보도실 지속 가능성 신뢰 센터
트렌드 항목
사이버보안 디지털 트랜스포메이션 스마트 제조 The Connected Enterprise®
 
로크웰 오토메이션 브랜드
Allen‑Bradley FactoryTalk LifecycleIQ 서비스
이벤트 및 교육
이벤트 교육 웨비나
 
PartnerNetwork
파트너 찾기 PartnerNetwork란 무엇입니까?
문의하기
TechConnect 지원 고객 관리팀 일반 문의 구매 방법 윤리 문제 신고
통찰력
사례 연구 블로그 Automation Today 팟캐스트
BlogRockwell Automation's Blog
법적 고지
개인 정보 보호 및 쿠키 사용 정책
이메일 기본 설정
쿠키 기본 설정
접근성 기본 설정
© 2025 Rockwell Automation
Rockwell Automation 홈
Please update your cookie preferences to continue.
This feature requires cookies to enhance your experience. Please update your preferences to allow for these cookies:
  • Social Media Cookies
  • Functional Cookies
  • Performance Cookies
  • Marketing Cookies
  • All Cookies
You can update your preferences at any time. For more information please see our Privacy Policy
CloseClose