| Interface |
3 Digital
|
|---|
| With approval according to UL |
No
|
|---|---|
| North American temperature code |
T4A
|
| IEC temperature code |
T4
|
| With detachable clamps |
Yes
|
|---|---|
| Enclosure type rating |
None (open-style)
|
| Vibration |
2.0 G @ 10…500 Hz
|
| Shock |
Opsal: 15 G
|
| Width |
94 mm
|
| Height |
97 mm
|
| Depth |
94 mm
|
| Rail mounting possible |
Yes
|
| Voltage type for actuating |
DC
|
|---|---|
| Rated control supply voltage at DC |
24 V
|
| Model |
Expansion device
|
| Type of electric connection |
Plug-in connection
|
| Wire type |
Signal connections: shielded, Power and relay connections: unshielded
|
| Wiring category |
2 - on relay, power, and signal ports, 3 - on serial ports, 2 - on XM bus ports
|
| Power dissipation, max |
2.9 W
|
| Surrounding air temperature, max |
65 °C
|
|---|---|
| Operating temperature |
-20 °C
|
| Emissions |
Class A
|
| Relative humidity |
5...95% noncondensing
|
| ESD immunity |
4 kV contact discharges, 8 kV air discharges
|
| EFT/B immunity |
±2kV @ 5kHz on power ports, ±1kV @ 5kHz on relay and signal ports, ±1kV @ 5kHz on XM bus port
|
| Surge transient immunity |
±1 kV line-earth(CM) on relay ports, ±1 kV line-earth(CM) on signal ports, ±1 kV line-earth(CM) on XM bus port
|
| Conformal coating |
All printed circuit boards are conformally coated in accordance with IPC-A-610C
|
| Radiated RF immunity |
10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
|
| Storage temperature |
-40 °C
|
| Nonoperating temperature |
-40 °C
|
| Conducted RF immunity |
10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
|
| Status indicator |
Module power - red/green, Shutdown relay - red, Alarm relay - red
|
|---|
| Reset |
Local reset switch on top of module, Remote reset switch that is wired to terminal base
|
|---|---|
| Failsafe |
Normally energized
|
| Logic |
Two-out-of-three, One-out-of-three
|
| Number |
Four relays, two sets of contacts each - DPDT (2 Form C)
|
| Contacts |
250V AC @ 50/60Hz @ 3 A resistive, 150V DC @ 1.6A resistive
|
| Activation |
Low logic level (<0.8V) on the overspeed/circuit fault inputs
|
| Latching |
The shutdown and alarm relays latch when the conditions that activate them are met
|
| Heat production, max |
2.9 W
|
|---|---|
| Voltage and current ratings |
Supply: 24V DC @ 0.2A maximum, Class 2/SELV, Relay: 250V AC @ 50/60Hz, 3 A Res, 150V DC @ 1.6A Res
|
| Host communication |
The XM-442 module communicates to the speed modules connected to it only via the three digital inputs on the front of the terminal base. Power and communication pass through the side connector of the terminal base but are not used by the XM-442 module
|
|---|
| Tipo | Recurso | Publicación |
|---|---|---|
| Datos técnicos | 1440-td001_-en-p | 1440-TD001 |
| General | Product Cutsheet | -- |
¿Busca más documentación?
Encuentre documentación técnica seleccionada para este producto en el Centro de Documentación Técnica o busque en nuestra biblioteca de literatura.
Busque en la biblioteca de literatura
- China CCC
Este producto cuenta con las certificaciones mencionadas al 2025-07-19. Los productos vendidos antes o después de esta fecha podrían tener certificaciones diferentes. Consulte la etiqueta del producto para verificar las certificaciones que posee.
¿Busca más notas técnicas?
Encuentre preguntas y respuestas de los expertos técnicos de Rockwell Automation para este producto en nuestra base de conocimientos.
Buscar en la Base de Conocimientos
Especificaciones técnicas
| Interface |
3 Digital
|
|---|
| With approval according to UL |
No
|
|---|---|
| North American temperature code |
T4A
|
| IEC temperature code |
T4
|
| With detachable clamps |
Yes
|
|---|---|
| Enclosure type rating |
None (open-style)
|
| Vibration |
2.0 G @ 10…500 Hz
|
| Shock |
Opsal: 15 G
|
| Width |
94 mm
|
| Height |
97 mm
|
| Depth |
94 mm
|
| Rail mounting possible |
Yes
|
| Voltage type for actuating |
DC
|
|---|---|
| Rated control supply voltage at DC |
24 V
|
| Model |
Expansion device
|
| Type of electric connection |
Plug-in connection
|
| Wire type |
Signal connections: shielded, Power and relay connections: unshielded
|
| Wiring category |
2 - on relay, power, and signal ports, 3 - on serial ports, 2 - on XM bus ports
|
| Power dissipation, max |
2.9 W
|
| Surrounding air temperature, max |
65 °C
|
|---|---|
| Operating temperature |
-20 °C
|
| Emissions |
Class A
|
| Relative humidity |
5...95% noncondensing
|
| ESD immunity |
4 kV contact discharges, 8 kV air discharges
|
| EFT/B immunity |
±2kV @ 5kHz on power ports, ±1kV @ 5kHz on relay and signal ports, ±1kV @ 5kHz on XM bus port
|
| Surge transient immunity |
±1 kV line-earth(CM) on relay ports, ±1 kV line-earth(CM) on signal ports, ±1 kV line-earth(CM) on XM bus port
|
| Conformal coating |
All printed circuit boards are conformally coated in accordance with IPC-A-610C
|
| Radiated RF immunity |
10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
|
| Storage temperature |
-40 °C
|
| Nonoperating temperature |
-40 °C
|
| Conducted RF immunity |
10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
|
| Status indicator |
Module power - red/green, Shutdown relay - red, Alarm relay - red
|
|---|
| Reset |
Local reset switch on top of module, Remote reset switch that is wired to terminal base
|
|---|---|
| Failsafe |
Normally energized
|
| Logic |
Two-out-of-three, One-out-of-three
|
| Number |
Four relays, two sets of contacts each - DPDT (2 Form C)
|
| Contacts |
250V AC @ 50/60Hz @ 3 A resistive, 150V DC @ 1.6A resistive
|
| Activation |
Low logic level (<0.8V) on the overspeed/circuit fault inputs
|
| Latching |
The shutdown and alarm relays latch when the conditions that activate them are met
|
| Heat production, max |
2.9 W
|
|---|---|
| Voltage and current ratings |
Supply: 24V DC @ 0.2A maximum, Class 2/SELV, Relay: 250V AC @ 50/60Hz, 3 A Res, 150V DC @ 1.6A Res
|
| Host communication |
The XM-442 module communicates to the speed modules connected to it only via the three digital inputs on the front of the terminal base. Power and communication pass through the side connector of the terminal base but are not used by the XM-442 module
|
|---|
Documentos
|
1440-td001_-en-p
Datos técnicos
1440-TD001 |
|
Product Cutsheet
General
-- |
| Tipo | Recurso | Publicación |
|---|---|---|
| Datos técnicos | 1440-td001_-en-p | 1440-TD001 |
| General | Product Cutsheet | -- |
¿Busca más documentación?
Encuentre documentación técnica seleccionada para este producto en el Centro de Documentación Técnica o busque en nuestra biblioteca de literatura.
Busque en la biblioteca de literatura
Certificaciones
- China CCC
Este producto cuenta con las certificaciones mencionadas al 2025-07-19. Los productos vendidos antes o después de esta fecha podrían tener certificaciones diferentes. Consulte la etiqueta del producto para verificar las certificaciones que posee.
Productos alternativos
Notas técnicas
¿Busca más notas técnicas?
Encuentre preguntas y respuestas de los expertos técnicos de Rockwell Automation para este producto en nuestra base de conocimientos.
Buscar en la Base de Conocimientos
Loading
Copyright ©2025 Rockwell Automation, Inc.